How to Clean and Care for Your Watch

How do you clean a watch?

To clean a watch, wipe the case and crystal with a soft, dry microfiber cloth, then clean the strap or bracelet according to its material. Stainless steel takes mild soapy water, leather needs a dry cloth and conditioner, and rubber and polycarbon only need a damp cloth.

Before any water goes near the watch, check its water resistance rating on the product page and make sure the crown is pushed fully in. The sections below take each D1 Milano material in turn.

What do you need to clean a watch?

You need two microfiber cloths, a soft toothbrush, a small bowl of lukewarm water with a drop of mild, unscented soap, and cotton swabs for tight corners. A leather strap also needs a leather conditioner. Avoid alcohol, solvents and household cleaners on any part of the watch. D1 Milano also sells a Watch Cleaning Kit.

How to clean a stainless steel watch

To clean a stainless steel watch, brush the case and bracelet gently with a soft toothbrush dipped in mild soapy water, paying attention to the gaps between links. Wipe away the soap with a damp cloth, then dry the steel completely with a clean microfiber cloth.

Dirt and skin oils collect between the links of a bracelet, and that build-up dulls the steel and can make the bracelet feel stiff. On an integrated bracelet, follow the line from the case into the first links, where grime tends to sit. If you wear the watch daily, clean the bracelet every few weeks.

How to polish a stainless steel watch

Use a dry polishing cloth on the polished surfaces only, such as beveled edges. Brushed steel has a fine directional grain, so polishing it leaves shiny patches. If your watch has a gold or black coated finish (PVD or DLC), such as the Ultra Thin 40mm Black DLC, do not polish it at all, because a polishing cloth can wear through the coating.

How to remove scratches from a watch

Light scuffs on polished steel can often be softened with a polishing cloth. Deeper scratches, and any mark on brushed steel or a PVD or DLC finish, are a job for a jeweler or watch repairer, who can refinish the surface without changing its texture. Scratches on the crystal need a professional too.

How to clean a leather watch strap

To clean a leather watch strap, wipe it with a dry or very slightly damp cloth, then let it air dry away from heat. Every month or two, apply a small amount of leather conditioner to keep the leather supple. Never soak leather or clean it with household soap.

Leather absorbs sweat and water, which is why it darkens and loses its shape over time. Take a leather-strap watch off before washing your hands, swimming or exercising, and let the strap dry flat if it does get wet. D1 Milano uses leather straps on Ultra Thin models such as the Earthline and Oceanline.

How to clean a rubber or silicone watch band

To clean a rubber watch band, wash it with lukewarm water and a drop of mild soap, scrub the texture with a soft toothbrush, then rinse and dry it with a cloth. Silicone bands are cleaned the same way. Keep water away from the case unless its rating allows it.

Rubber is the easiest strap to keep clean, which makes it the practical choice for sport and travel. It is the strap on models from the D1 Milano Skeleton collection, such as the Ocean Pulse. Avoid sunscreen, insect repellent and alcohol-based wipes on the band, which can leave a residue or dry out the rubber over time.

How to clean a polycarbon watch

To clean a D1 Milano Polycarbon watch, wipe the case and bracelet or strap with a microfiber cloth dampened with lukewarm water and a drop of mild soap, then dry it with a clean cloth. Do not use alcohol, acetone or solvent-based cleaners, which can cloud or weaken polycarbonate.

Polycarbonate is light and handles everyday knocks well. You can see the material across the D1 Milano Polycarbon collection, on models like the Polycarbon 40.5mm Shadow, and read are polycarbonate watches durable? for how it holds up over years of wear.

A simple watch care routine

A simple routine keeps a watch looking new: wipe it with a dry microfiber cloth at the end of each day, clean the strap or bracelet properly every few weeks, and condition leather every month or two. Check the bracelet pins and strap buckle while you clean.

How to store a watch

To store a watch, keep it in its box or a lined watch case, away from direct sunlight, heat and damp. Store watches apart from each other and from jewelry, so hard surfaces cannot scratch the case or crystal. Keep leather straps flat rather than tightly curled.

An automatic watch, such as a model from the men's Automatico collection, stops when it is not worn for a while. That does no harm. Set the time again when you next put it on.

How to travel with a watch

When you travel with a watch, wear it or pack it in a padded watch roll or case in your hand luggage, not loose in a bag. Keep it away from other metal items that could scratch it, and wipe off sunscreen and salt water at the end of each day.

For beach and pool trips, a rubber or polycarbon watch is the easier choice. Leather does not cope well with water, and salt and chlorine left to dry on a steel bracelet dull the finish.

When should a watch go to a professional?

Take your watch to a jeweler or watch repairer if moisture appears under the crystal, the crown feels loose, a bracelet pin works loose, or a scratch needs refinishing. These jobs need specialized tools and parts, and a check that the case is sealed again afterward, which home cleaning cannot replace.

If your watch is still under warranty, contact the D1 Milano customer service team before taking it to a jeweler. They will tell you whether the repair is covered by the warranty and what to do next.

To resize the bracelet while you have it off, follow our guide on how to remove links and resize your D1 bracelet. For a side-by-side look at the two main case materials, read polycarbonate vs stainless steel watches.

Browse the D1 Milano Ultra Thin bracelet watches, or see the Ultra Thin Bracelet 40mm Linen.

Frequently Asked Questions

How do you clean a watch band?

Clean a watch band according to its material. Brush a stainless steel bracelet with mild soapy water and dry it fully, wash a rubber or silicone band with soap and lukewarm water, and wipe a leather strap with a dry cloth before conditioning it.

Can I clean my watch with water?

Only if its water resistance rating allows it, so check the product page first and make sure the crown is pushed in. Even then, use a damp cloth rather than running water on the case, and never soak a leather strap.

How do you polish a stainless steel watch?

Use a dry polishing cloth on polished surfaces only. Avoid brushed steel, which shows shiny patches when polished, and never polish a PVD or DLC coated finish, because the cloth can wear through the coating.

Can you remove scratches from a watch at home?

Light scuffs on polished steel can often be softened with a polishing cloth. Deeper scratches, marks on brushed steel, PVD or DLC finishes, and scratches on the crystal should go to a jeweler or watch repairer.

How should I store my watch when I am not wearing it?

Keep it in its box or a lined watch case, away from sunlight, heat and damp, and apart from other watches and jewelry so nothing scratches the case or crystal. Store leather straps flat.

Condividi